3D printing porous piezoelectric ceramics for medical diagnosis

Ultrasound imaging technologies have been widely used to visualize internal discontinuities in objects for medical diagnosis because of their non-invasiveness, high sensitivity, and strong penetration capabilities. The ultrasonic transducer for imaging operates based on both direct and converse effects of piezoelectric materials which enables it to receive and generate signals. Currently, the commercially used piezoelectric materials are lead-based single crystals and/or ceramics, with superior piezoelectric properties. However, these materials are to be replaced due to the toxic nature of lead. Moreover, these bulk materials exhibit large electrical impedance difference with that of the power source and large acoustic impedance difference with that of human tissue, which requires the use of an additional matching layer in the transducer, leading to increased size and cost of the device. It is important to develop an all-in-one piezoelectric material which not only has good piezoelectric performance, but also has good electrical and acoustic impedance matching with the electric source and human tissue. <br /> <br /> Porous piezoelectric materials which can be regarded as composites of ceramic and air are well suited for medical transducer. Key benefits of using porosity in a piezoelectric material is that it can effectively reduce the acoustic impedance of piezoelectric ceramic by reducing the density and speed of sound inside the material. As such, the acoustic impedance matching between the porous piezoelectric ceramic and biological tissue could be greatly improved. However, the introduction of porosity into bulk ceramic can reduce the dielectric permittivity and hence capacitance of the material, which lead to increased electrical impedance difference. This could be solved by developing piezoelectric ceramics with high dielectric permittivity and piezoelectric performance through materials design.<br /> <br /> This project will use 3D printing method to fabricate porous lead-free piezoelectric ceramics for ultrasound imaging in medical application. 3D printing technology will be used to control the shape, orientation and concentration of pores inside piezoelectric ceramic to achieve good acoustic impedance matching. <br />

<p>Formal applications for research degree study should be made online through the <a href="https://www.leeds.ac.uk/research-applying/doc/applying-research-degrees">University's website</a>. Please state clearly in the Planned Course of Study section that you are applying for <em><strong>PHD Mechanical Engineering FT</strong></em>, in the research information section that the research degree you wish to be considered for is <em><strong>3D printing porous piezoelectric ceramics for medical diagnosis</strong></em> as well as <a href="https://eps.leeds.ac.uk/faculty-engineering-physical-sciences/staff/13433/dr-man-zhang">Dr Man Zhang</a> as your proposed supervisor and in the finance section, please state clearly <em><strong>the funding that you are applying for, if you are self-funding or externally sponsored</strong></em>.</p> <p>If English is not your first language, you must provide evidence that you meet the University's minimum English language requirements (below).</p> <p><em>As an international research-intensive university, we welcome students from all walks of life and from across the world. We foster an inclusive environment where all can flourish and prosper, and we are proud of our strong commitment to student education. Across all Faculties we are dedicated to diversifying our community and we welcome the unique contributions that individuals can bring, and particularly encourage applications from, but not limited to Black, Asian, people who belong to a minority ethnic community, people who identify as LGBT+ and people with disabilities. Applicants will always be selected based on merit and ability.</em></p> <p>Applications will be considered on an ongoing basis.  Potential applicants are strongly encouraged to contact the supervisors for an informal discussion before making a formal application.  We also advise that you apply at the earliest opportunity as the application and selection process may close early, should we receive a sufficient number of applications or that a suitable candidate is appointed.</p> <p><strong>Please note that you must provide the following documents in support of your application by the closing date of Monday 6 January 2025 if applying for the China Scholarship Council-University of Leeds Scholarship, Monday 3 February 2025 if applying for Leeds Doctoral Scholarship or Tuesday 1 April 2025 for Leeds Opportunity Research Scholarship.</strong></p> <p>If you are applying with external sponsorship or you are funding your own study, please ensure you provide your supporting documents at the point you submit your application:</p> <ul> <li>Full Transcripts of all degree study or if in final year of study, full transcripts to date</li> <li>Personal Statement outlining your interest in the project</li> <li>CV</li> </ul>

Applicants to research degree programmes should normally have at least a first class or an upper second class British Bachelors Honours degree (or equivalent) in an appropriate discipline. The criteria for entry for some research degrees may be higher, for example, several faculties, also require a Masters degree. Applicants are advised to check with the relevant School prior to making an application. Applicants who are uncertain about the requirements for a particular research degree are advised to contact the School or Graduate School prior to making an application.

The minimum English language entry requirement for research postgraduate research study is an IELTS of 6.0 overall with at least 5.5 in each component (reading, writing, listening and speaking) or equivalent. The test must be dated within two years of the start date of the course in order to be valid. Some schools and faculties have a higher requirement.

<p><strong>Self-Funded or externally sponsored students are welcome to apply.</strong></p> <p><strong>UK</strong> – The <a href="http://phd.leeds.ac.uk/funding/138-leeds-doctoral-scholarship-2025-faculty-of-engineering-and-physical-sciences#:~:text=Key%20facts&text=One%20Leeds%20Doctoral%20Scholarship%20is,rata%20for%20part%2Dtime%20study.">Leeds Doctoral Scholarship</a> <strong>(closing date: Monday 3 February 2025)</strong> and <a href="https://phd.leeds.ac.uk/funding/234-leeds-opportunity-research-scholarship-2022">Leeds Opportunity Research Scholarship</a> <strong>(closing date: Tuesday 1 April 2025)</strong> are available to UK applicants.  <a href="https://phd.leeds.ac.uk/funding/60-alumni-bursary">Alumni Bursary</a> is available to graduates of the University of Leeds.</p> <p><strong>Non-UK</strong> – The <a href="https://phd.leeds.ac.uk/funding/48-china-scholarship-council-university-of-leeds-scholarships-2021">China Scholarship Council - University of Leeds Scholarship</a> is available to nationals of China <strong>(closing date: Monday 6 January 2025)</strong>. The <a href="https://phd.leeds.ac.uk/funding/73-leeds-marshall-scholarship">Leeds Marshall Scholarship</a> is available to support US citizens. <a href="https://phd.leeds.ac.uk/funding/60-alumni-bursary">Alumni Bursary</a> is available to graduates of the University of Leeds.</p> <p>You will be responsible for paying the overtime fee in full in your writing up/overtime year (£320 in Session 2024/25), but the scholarship maintenance allowance will continue to be paid for up to 6 months in the final year of award.</p> <p><strong>Important:</strong> Please note that that the award does <em><strong>not</strong></em> cover the costs associated with moving to the UK.  All such costs (<a href="https://www.leeds.ac.uk/international-visas-immigration/doc/applying-student-visa">visa, Immigration Health Surcharge</a>, flights etc) would have to be met by yourself, or you will need to find an alternative funding source. </p> <p>Please refer to the <a href="https://www.ukcisa.org.uk/">UKCISA</a> website for information regarding Fee Status for Non-UK Nationals.</p>

<p>For further information about this project, please contact Dr Man Zhang by email to <a href="mailto:M.Zhang7@leeds.ac.uk">M.Zhang7@leeds.ac.uk</a></p> <p>For further information about your application, please contact PGR Admissions by email to <a href="mailto:phd@engineering.leeds.ac.uk">phd@engineering.leeds.ac.uk</a></p>